Counter swim units

Counter swim units BADU Jet classic

For mounting into walls of all pool models, as a conversation piece, for fitness training, as a wave or air bubble bath, for underwater massages (consult physician), endless no-lap swimming with no need to turn around, even in the smallest pool.

ArtN°

230.3000.000

230.4000.000

230.4900.000

Article

BADU Jet classic pre-assembly kit

BADU Jet classic 58 m³/h final assembly kit 

BADU Jet classic 54 m³/h final assembly

kit 2,20 kW, 230V

Counter swim units BADU Jet / Super-sport V

For mounting into walls of all pool models, as a conversation piece, for fitness training, as a wave or air bubble bath, for underwater massages (consult physican), endless no-lap  swimming with no turns necessary.

For use in puplic pools we recommend the model BADU Jet super-sport V with reinforced nozzle mounting bracket, nozzles not adjustable, no flow rate adjustment, on/off switch arranged outside the pool

ArtN°

230.1000.000

230.2000.000

230.2900.000

230.1200.000

230.2200.000

Article

BADU Jet super-sport pre-assembly kit  

BADU Jet super-sport 75 m³/h final assembly kit 3,00 kW, 400/230V

BADU Jet super-sport 75 m³/h final assembly kit 3,00 kW, 230V

BADU Jet super-sport V pre-assembly kit

BADU Jet super-sport V 75 m³/h final assembly kit 3,00 kW, 400/230V

Various accessories for all BADU Jet counter

swim units

Massage hose for 40 mm or 28 mm nozzle, 1,50 m long,

coupling and massage jet connection and massage nozzle, completly assembled, fits the jet nozzles of

all counter swim units.

ArtN°

230.0001.000

Article

Massage hose for large nozzle, 40 mm

Massage hose with pulsator, as above, however, a pulsator (pulsating massage nozzle) is attached instead of the standard massage nozzle, for 28 mm or 40 mm nozzle.

ArtN°

230.0003.000

Article

Massage hose with pulsating nozzle for large nozzle, 40 mm

Stainless steel grab bar with fasteners, for all

pool models

ArtN°

230.0010.000

230.0011.000

Article

Stainless steel grab bar for BADU Jet classic and BADU Jet smart, 25 x 250 mm, stainless steel 1.4401

Stainless steel grab bar for BADU Jet super-sport, 35 x 500 mm

Counter swim units BADU Jet active

A small budget-sized and reliable overhang counterswim unit, especially suitable for above ground pools. With one swivel nozzle. Only available for single-phase current.

ArtN°

230.7800.000

230.7851.000

Article

BADU Jet active 24m³/h, 0,75 kW, 230V

Telescoping support

Massage hose, 1,50 m long, coupling and massage jet connection and massage nozzle, completely assembled, fits the jet nozzles of all counter swim units.

ArtN°

230.002.000

Article

Massage hose for small nozzle, 28 mm

Massage hose with pulsator, as above, however, a pulsator (pulsating massage nozzle) is attached instead of the standard massage nozzle.

ArtN°

230.0004.000

Article

Massage hose with pulsating massage nozzle for small nozzle, 28 mm

Counter swim unit BADU Jet impulse/impulse spot

The same as the BADU Jet standard model but with a more powerful pump as well as a flow and direction control nozzle. This unit will satisfy just about all expectations. Massage hose and pulsator are included.

ArtN°

233.7100.000

233.7300.000

233.7851.000

Article

BADU Jet Impulse 40 m³/h, 1,60 kW,230V

BADU Jet impulse-spot 40 m³/h, 1,60 kW, 230V

Telescoping support

For overhang units with a spot the transformer is not mounted inside the BADU Jet cover. It must be mounted externally.

Counter swim unit BADU Jet action / action-spot

The most powerful among the BADU Jet overhang units with two swivel nozzels which, for the tree-phase design, can be regulated in addition. A unit for the peak-performance. A challenge even for trained athletes.

ArtN°

233.6100.000

233.6300.000

233.6000.000

233.6200.000

233.7851.000

Article

BADU Jet action 54 m³/h, 2,20 kW, 230V

BADU Jet action-spot 54 m³/h, 2,20 kW, 230V

BADU Jet action 75 m³/h, 3,00 kW, 400/230V

BADU Jet action-spot 75 m³/h, 3,00 kW, 400/230V

Telescoping support

For overhang units with a spot the transformer is not mounted inside the BADU Jet cover. It must be mounted externally.

Massage hose, 1,50 m long, coupling and massage jet connection and massage nozzle, completely assembled, fits the jet nozzles of all counter swim units.

ArtN°

230.0001.000

Article

Massage hose for large nozzle, 40 mm

Massage hose with pulsator, as above, however, a pulsator (pulsating massage nozzle) is attached instead of the standard.

ArtN°

230.0003.000

Article

Massage hose with pulsating massage nozzle for large nozzle, 40 mm